Ganz ZC-D500 Series Manual de instrucciones - Página 6
Navegue en línea o descargue pdf Manual de instrucciones para Cámara de seguridad Ganz ZC-D500 Series. Ganz ZC-D500 Series 12 páginas. Mini dome camera
Imprimir página
Embedding in the ceiling or wall
Be sure to use the adapter ring when embedding the unit in the ceiling or
wall.
1
Drilling holes in the ceiling or wall
Use the template included to mark out the position on the ceiling or wall where
you want to install the unit.
●
Use the template, drill two holes for screws (Screw B) used to attach the adapter
ring. Then, follow the perforations on the template and cut out a hole to embed
the camera body.
Attention
Double check to make sure that the sizes and positions of the holes are
●
appropriate BEFORE drilling the holes.
Attaching the adapter ring
2
Attach the adapter ring to the ceiling
or wall to which you want to attach the
camera body.
●
Please use fixing screws suitable
for the material of the ceiling or wall
when attaching the camera body. We
recommend using screws with a 4mm
diameter.
3
Attaching the camera body
Remove the surface mount cover from
the camera body.
Remove the body cover and attach the
camera body to the adapter ring.
●
Please use the self-tapping screws
included. Do not use any other
screws.
When you finish attaching the camera, refer to page EG-7.
Attaching to a 4S junction box
Be sure to use the adapter ring to attach the camera body when embedding
it in the 4S junction box.
1
Attaching the adapter ring
Attach the adapter ring to the 4S
junction box.
●
Please use screws that are suitable
for the 4S junction box.
Attention
Do not tighten the screws to the extent that the adapter ring is bent.
●
2
Attaching the camera body
Remove the surface mount cover
from the camera body.
Remove the body cover and
attach the camera body to the
adapter ring.
●
Please use the self-tapping
screws included. Do not use
any other screws.
When you finish attaching the camera, refer to page EG-7.
EG-6