Avantalk hm100 Manual del usuario - Página 10

Navegue en línea o descargue pdf Manual del usuario para Auriculares Avantalk hm100. Avantalk hm100 17 páginas. Universal bluetooth motorcycle kit (headset + interphone)

Imprimir página

a. HM100 will switch to standby mode automatically if it can't pair with any device within 2

minutes.

b. HM100 will power itself off if it is not connected with any device within 10 minutes

c. HM100 can connect with two devices simultaneously, either two cell phones or a cell

phone and an interphone, you can connect HM100 with the other Bluetooth device when

it is in standby or intercom

d. Once paired and connected with two Bluetooth devices, it will automatically connect to the

two devices whenever you turn the HM100 on, provided that the HM100 is within range.

We found most of the online technical support questions are caused by improper pairing

between the headset and the Bluetooth device. Please follow the instruction step-by-step.

7. Intercom Feature:

When two HM100 headsets are connected, you're able to use intercom features.

• Send out intercom: Press and hold VOL+ or VOL- for about 2 seconds, and release it until

hearing a short tone.

Note: When HM100 is connect with another intercom and a cell phone at the

same time, then you can not send out intercom during a phone call

• Cancel intercom: Short press MFB button when sending out intercom, you will hear a short

tone.

status.