Ganz ZC-Y20PH Manual de instrucciones - Página 18

Navegue en línea o descargue pdf Manual de instrucciones para Cámara de seguridad Ganz ZC-Y20PH. Ganz ZC-Y20PH 20 páginas. Colour cs mount camera

Imprimir página

10. ABOUT THE MODE SWITCH

Set each switch to the position that provides the best picture reproduction. The color camera has the remote
camera control function. When setting the camera's property with the menu key, set the corresponding switch
(AGC, backlight compensation, ATW, and flickering reduction) to the "(MENU)" side (right-hand side).
(MENU)
AUTO
OFF
OFF
AWB
1/120
INT
Mode switch
(factory-preset position)
● Lens auto/manual selector switch
AUTO
MANU
● AGC switch
OFF
(AGC)
● Backlight compensation switch
OFF
(BLC)
● ATW switch
AWB
(ATW)
18
Lens Auto/Manual selector switch
MANU
AGC switch
(AGC)
Backlight compensation switch
(BLC)
ATW switch
(ATW)
Flickering reduction switch
(1/50)
Synchronization switch
LL
Set the switch to this position
when using an auto-iris lens.
Normally, set the switch to this
position. Even when an ambient
brightness level changes, a video
output level is automatically
maintained constant, providing
the clear picture.
Normally, set the switch to this
position.
Normally, set the switch to this
position. This position permits
the camera to automatically
adjust
the white balance
depending on the type of light
source
(change
temperature).
AUTO
OFF
OFF
AWB
in
color
automatically adjusts the white balance of the on-screen
image and thereafter, keeps the white balance status.
Since several seconds are required before the white
balance is set, observe that the object does not change
during that period. When readjusting the white balance, first
shift the switch to "(ATW)" position and shift it back to AWB
position, then adjust the balance in the same manner.
Set the switch to this position
MANU
when using a manual-iris or
fixed iris lens.
Set this switch to OFF position
when the brightness level of an
(AGC)
object frequently changes.
This position prevents an object
from becoming too dark and the
(BLC)
picture
background
becoming too white to be
viewed.
When the ATW function is disabled
because the camera is used under a
special light source or multiple light
sources
that
(ATW)
temperature, set the switch to AWB
position. As soon as the switch is
shifted to this position, the camera
from
differ
in
color