Ganz ZN-Y11VP(N)E Manual rápido del usuario

Navegue en línea o descargue pdf Manual rápido del usuario para Cámara de seguridad Ganz ZN-Y11VP(N)E. Ganz ZN-Y11VP(N)E 6 páginas.

ZN-Y11VP(N)E/ZN-NH11VP(N)E/ZN-NHW11VP(N)E

Quick User Guide

This manual has been designed to guide you through basic settings of your IP devices, such as installation and

configuration for using them.

Step1. Connect cables to IP device

Connect each cable to the device. To see the correct positions of all connectors, refer to the following image

below.

* Models herein and their

appearance are subject to change

without any prior notice.

RESET Button

LAN

Step2. Set up network environment

The default IP address of your IP device is 192.168.XXX.XXX. You can find the available IP address from the

MAC address of your device. Please make sure the device and your PC are on the same network segment

before running the installation. If the network segment was different between your PC and the device, change

your PC's settings as below.

IP address : 192.168.xxx.xxx

Subnet mask: 255.255.0.0

EC11 Ver1.2

LOOP OUT

RS-485 DO DI

- +

C 1 C 1

ETHERNET

CCW

SET SCREW

Set Screw

RESET

AUDIO

+ ‐

Out In

RED

Micro SD

(For IRIS LENS)

Make sure the polarity is correct. Incorrect

connection may cause malfunction or

Caution

damage to the IP device.

‐

DC 12V

Power Adaptor Connector (DC 12V)