HIKVISION TURBO HD D7T Series Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Cámara de seguridad HIKVISION TURBO HD D7T Series. HIKVISION TURBO HD D7T Series 10 páginas.

2.1 Ceiling Mounting

2.1.1 Ceiling Mounting without Inclined Base

Steps:

1. Disassemble the dome camera by loosening three

screw of the bubble, and then take apart the bubble,

as shown in Figure 2-1.



Three screws on the bubble are all drop-proof screws. You

don't have to loosen them completely.



The safety rope is hung on the bubble and the mounting

base. Do not drag the camera in case of the damage.

2. Attach the drill template (supplied) to the place

where you want to fix the camera, and then drill the

screw holes and the cable hole in the ceiling

according to the drill template.

3. Fix the mounting base to the ceiling with the screws.

Figure 2-3 Fix the Mounting Base and Camera

4. Route the cables through the cable hole and

connect the video cables and power cord.

5. Adjust the camera according to Figure 2-4 to get an

optimum angle.

1). Rotate the camera body to adjust the pan angle

[0° to 355°].

2). Loosening the T direction screw to adjust the tilt

angle [0° to 75°]. For 2.8mm lens models, the tilt

angle range is [0° to 65°].

3). Rotate the camera body to adjust the rotation

position angle [0° to 355°].

Screw

Figure 2-1 Disassemble the Camera

H ole A: for c a b le s r oute d th rough t he c e iling

s c re w hole 1: for M ounting B a s e

Figure 2-2 Drill Template

Drill Temp late