Decor Star PL-004-SS-TB Manual de instrucciones de instalación - Página 8

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Sanitarios Decor Star PL-004-SS-TB. Decor Star PL-004-SS-TB 12 páginas.

Installation (cont.)

Decor Star

5. Using a drill with a tile bit, drill the hole slowly into the tile.

Do not drill into any piping or wiring in the wall. Insert the

anchors into the wall.

6. Secure the mounting brackets to the wall with the screws.

7. Apply thread sealant tape to the threading on the shut-off

valves before connect both hot and cold water supply hoses

to the valves.

IMPORTANT :

- Make sure the water supply hoses are connected to the

corresponding shut-off valves - i.e. cold water hose to the cold

water valve and hot water hose to the hot water valve. The

thermostatic valve will not function properly if the hoses are

installed incorrectly.

- Before hanging the shower panel on the wall. Turn on both

shut-off valves and test all water functions on the shower

panel and check for leaks at this point. You should have good

water flow to the shower panel and full temperature control

from the knobs.

The range of the control knob is limited in both clockwise

and counter-clockwise directions. DO NOT force to

turn the knob pass its limit. Overturning the control will

damage the thermostatic valve making it fail to regulate

temperature.

PL-004-SS-TB Rev. C 022018