HIKVISION TURBO HD DS-2CE56H5T-ITMEB Manual del usuario - Página 5
Navegue en línea o descargue pdf Manual del usuario para Cámara de seguridad HIKVISION TURBO HD DS-2CE56H5T-ITMEB. HIKVISION TURBO HD DS-2CE56H5T-ITMEB 17 páginas. Turret & dome camera
Imprimir página
1.2.3 Overview of Type III Camera
Mounting
Base
Tilt Adjusting
Screw
Bubble
Figure 1-3 Overview of Type III Camera
2 Installation
Before you start:
Make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that all the related equipment is power-off
during the installation.
Check the specification of the products for the
installation environment.
Check whether the power supply is matched with
your required output to avoid damage.
Make sure the wall is strong enough to withstand
three times the weight of the camera and the
bracket.
If the wall is cement, insert expansion screws before
installing the camera. If the wall is wooden, use
self-tapping screw to secure the camera.
If the product does not work properly, contact your
dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance by
yourself.
2.1 Installation of Type I Camera
2.1.1 Ceiling/Wall Mounting without Junction Box
Steps:
1. Disassemble the turret camera by rotating the
camera to align the notch to one of the marks, as
shown in the figure below.
Figure 2-1 Disassemble the Camera
2. Remove the mounting base from the camera body
with a flat object, e.g., a coin.
3. Paste the drill template (supplied) to the place
where you want to install the camera.
4. Drill the screw holes and the cable hole (optional)
on the ceiling/wall according to the drill template.
IR LED
Photoresistor
Black Liner
Safty Rope
Mark
Notch
Power Cord
12 VDC
Video Cable TVI