HIKVISION TURBO HD DS-2CE5AC5T-AVPIT3Z Manual del usuario - Página 5
Navegue en línea o descargue pdf Manual del usuario para Cámara de seguridad HIKVISION TURBO HD DS-2CE5AC5T-AVPIT3Z. HIKVISION TURBO HD DS-2CE5AC5T-AVPIT3Z 16 páginas. Dome & turret camera
Imprimir página2 Installation
Before you start:
Make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that all the related equipment is power-off
during the installation.
Check the specification of the products for the
installation environment.
Check whether the power supply is matched with
your required output to avoid damage.
Make sure the wall is strong enough to withstand
three times the weight of the camera and the
mounting.
If the wall is cement, insert expansion screws before
installing the camera. If the wall is wooden, use
self-tapping screw to secure the camera.
If the product does not function properly, contact
your dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance by
yourself.
2.1 Ceiling Mounting of Type I Camera
Before you start:
The installation steps of ceiling mounting and wall
mounting are similar, and the following takes ceiling
mounting as an example to describe the steps.
Steps:
1. Paste the dill template to the ceiling.
2. Drill the screw holes and cable hole (optional) in the
ceiling according to the drill template.
Note:
Cable hole is required, when adopting the ceiling
outlet to route cables.
3. Disassemble the camera to remove the bubble.
4. Attach the back box of camera to the ceiling and
secure them with supplied screws.
Figure 2-1 Drill Template
Figure 2-2 Remove the Bubble