HIKVISION Turbo HD DS-2CE5AD8T-VPIT3ZE Manual del usuario - Página 8
Navegue en línea o descargue pdf Manual del usuario para Cámara de seguridad HIKVISION Turbo HD DS-2CE5AD8T-VPIT3ZE. HIKVISION Turbo HD DS-2CE5AD8T-VPIT3ZE 17 páginas. Turbo hd dome camera
También para HIKVISION Turbo HD DS-2CE5AD8T-VPIT3ZE: Manual del usuario (12 páginas)
Imprimir página
10. Tighten the screws on the bubble of the dome
camera to finish the installation.
2.2 Ceiling Mounting of Type III Camera
Before you start:
The steps of ceiling mounting and wall mounting are
similar. Following takes ceiling mounting as an example
to describe the steps.
Steps:
1. Paste the drill template to where you want to install
the camera.
2. Drill screw holes and the cable hole (optional) on
the ceiling according to the drill template.
Note:
Drill the cable hole (hole A) when adopting the ceiling
outlet to route the cable.
3. Loosen the screws to remove the bubble. The
bubble and the mounting base are connected by the
safety rope, be careful when you disassemble the
camera.
4. Install the mounting base to the ceiling with
supplied screws.
Figure 2-7 Finish the Installation
Hole A: for cables routed through the ceiling
Figure 2-8 The Drill Template
Figure 2-9 Remove the Bubble
Drill Template
screw hole 1: fo r Mo untin g Base