Ganz LED-19 Manual del usuario - Página 3
Navegue en línea o descargue pdf Manual del usuario para Monitor Ganz LED-19. Ganz LED-19 20 páginas.
Imprimir página
Information
FCC compliance
Class A: This equipment has been tested and
found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instruction manual, may cause harmful interference
to radio communications. Operation of this
equipment in a residential area is likely to cause
harmful interference in which case the user will be
required to correct the interference at his own
expense.
This product was FCC verified under test
conditions that included the use of shielded I/O
cables and connectors between system
components. To be in compliance with FCC
regulations, the user must use shielded cables and
connectors for all except power cables.
European Union directives
2004/108/EC (EMC directive): This device is in
compliance with the essential requirements and
other relevant provisions of Directive 2004/108/EC.
2002/96/EC (WEEE directive): Products marked
with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper
recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or
dispose of it at designated collection points.
Important safeguards
1. Installation cautions:
•
Do not block any ventilation openings.
•
Always ensure that the monitor is located in
a well-ventilated area to prevent the unit
from overheating.
•
Only use accessories specified by the
manufacturer or those sold with the product.
•
Avoid operating or placing the monitor in
the following environments: extremes of
temperatures, both hot and cold; high
humidity; direct sunlight; excessively dusty
surroundings; avoid close proximity to other
equipment that generates a strong
magnetic field
2. Water and moisture: Do not use this
appliance near water. To reduce the risk of fire
or electric shock, do not expose this unit to rain
or moisture.
3. Power cord and power cord protection:
Power cords should be routed so that they not
likely to be walked on or pinched. Pay
particular attention to the location of cords and
plugs, convenience receptacles, and the point
of exit from the appliance.
4. Product care: Do not touch the screen directly
with fingers. The oils from your skin may leave
marks on the surface of the screen, which are
difficult to be removed and may damage the
screen permanently. Do not apply pressure to
the screen.
5. Cleaning: Clean only with a dry cloth.
6. Servicing: Do not attempt to service this unit
yourself. Opening or removing covers may
expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service
personnel.
7. Lightning: For added protection during a
lighting storm or when this unit is left
unattended and unused for long periods of time,
unplug the unit from the wall outlet and
disconnect the cable system. This will prevent
damage to the unit due to lightning and power
line surges.
8. Mains plug (2 pin/3 pin):
•
Do not remove the grounding or earth
connection from the power supply / mains
plug.
•
Always remember to unplug the monitor
from the power supply under the following
circumstances if the monitor will not be
1