DecoRad Handmate UV 1800 Manual del usuario - Página 15

Navegue en línea o descargue pdf Manual del usuario para Equipamiento industrial DecoRad Handmate UV 1800. DecoRad Handmate UV 1800 18 páginas.

Imprimir página

5. Error messages

EXPLANATION OF THE DISPLAY MESSAGES
Error
Description
E13
Lamp start fail
E14
Over-
(TEMP)
temperature
E15
Fan fail
(FAN)
E17
Temperature
sensor
U51
Distance
(DIST)
U94
Time
(TIME)
management
Solution
Turn both switches OFF.
Start from 4 PUTTING INTO OPERATION.
In case of recurrence E13, please consult DecoRad®
Systems
The UV lamp is too hot, leave the UV lamp to cool down
for 5 minutes. Turn both switches OFF.
Start from 4 PUTTING INTO OPERATION.
In case of recurrence, please consult DecoRad® Systems
Leave the UV lamp to cool down for 5 minutes. Turn both
switches OFF.
Start from 4 PUTTING INTO OPERATION.
In case of recurrence, please consult DecoRad® Systems
Leave the UV lamp to cool down for 5 minutes. Turn both
switches OFF.
Start from 4 PUTTING INTO OPERATION.
In case of recurrence, please consult DecoRad® Systems
The lamp-unit is turned too far from the object for more
than 30 seconds.
Please position the Handmate between 2 – 4 cm distance
from the floor, cure at approx. 3 cm
Auto OFF after 5 minutes no use
Handmate UV 1800 Firmware 2.9
15