IKEA IDT930SAGX0 Instrucciones de uso - Página 10
Navegue en línea o descargue pdf Instrucciones de uso para Lavavajillas IKEA IDT930SAGX0. IKEA IDT930SAGX0 15 páginas.
Imprimir página
OPTION SELECTIONS
Raises main wash temperature to improve cleaning for
loads containing tough, baked-on food.
Sanitizes dishes and glassware in accordance with NSF
International NSF/ANSI Standard 184 for Residential
Dishwashers. Certified residential dishwashers are not
intended for licensed food establishments. Only sanitizing
cycles have been designed to meet the requirements of
the NSF/ANSI 184 performance standard for soil removal
and for sanitization efficacy. There is no intention, either
directly or indirectly, that all cycles on a NSF/ANSI 184
certified dishwasher meet the NSF/ANSI 184 performance
standard for soil removal and for sanitization efficacy.
At end of the cycle, the "Sanitized" indicator will glow. If
your load did not properly sanitize, the indicator will flash
at the end of the cycle. This can happen if the cycle is
interrupted, or if the water does not reach the required
temperature. The light goes off when you open and close
the door or
press CANCEL.
Can be selected with any cycle for washing a small load of
dishes in the top rack.
Dries dishes with heat. This option, with the use of rinse
aid, will provides better drying performance. Plastic items
are less likely to deform when loaded in the top rack. Use
Heat Dry for optimum dry performance. Turn the Heat Dry
option off for air dry.
Delays the start of the cycle for 4 hours.
To delay the start:
1. Select a wash cycle and options.
2. Press DELAY WASH.
3. Press START/RESUME to begin 4 hour delay.
NOTE: If the door is opened (such as to add a dish), the
START/RESUME button must be pressed to resume the
delay countdown.
10
OPTIONS
CAN BE
WHAT IT DOES
SELECTED
WITH
Sensor
Raises the main
Heavy
wash temperature
Normal
to 130°F (54°C).
Sensor
Raises the main
Heavy
wash temperature
Normal
to 140°F (60°C)
and the final rinse
temperature to
156°F (69°C).
Available
with any
cycle
Any cycle
Uses heating
element to speed
drying times.
Heat Dry option
defaults to On
when any cycle is
selected, except
for 1 Hour and
Rinse Only.
Available
Delays the start
with any
of a cycle for a
cycle
maximum of
4 hours.
ADDED
ADDED
TIME TO
WATER
CYCLE
GALLONS
(LITERS)
0:00 to 0:40
0 to 3.0
(0 to 11.2)
0:00 to 2:20
1.2 to 6.2
(4.8 to 23.3)
Saves up to
0
0:20
0:10 to 0:50
0