IKEA IUD9500WX0 Manual de instrucciones de instalación - Página 18
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Lavavajillas IKEA IUD9500WX0. IKEA IUD9500WX0 44 páginas. Undercounter dishwasher plastic giant tub models
También para IKEA IUD9500WX0: Instrucciones de uso (25 páginas)
Option 2: Power Supply Cord
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
1. Plug in a grounded 3 prong outlet.
2. Check that power supply cord does not touch dishwasher
motor or lower part of dishwasher tub.
snect
Suppy
Helpful Tip:
Compression
fittings:
a) Slide nut onto copper tubing about 1" (2.5 cm).
b) Slide ferrule onto the tubing. Do not position ferrule on
the end of the tubing.
c) Put the tubing into the elbow as far as it will go.
d) Slide the nut and ferrule forward and start the nut onto the
elbow threads. Be gentle when handling and positioning
the copper tubing, it bends and kinks easily.
A. Elbow
B. Ferrule
C. Nut
1. To avoid vibration during operation, route the water supply line
so that it does not touch the dishwasher base, frame or motor.
2. With copper tubing pushed into compression
fitting as far as it
will go, use a wrench and tighten compression fitting nut to
elbow on water inlet valve.
3. Place paper towel under elbow. Turn on water supply and
check for leaks.
_
_,
_,
_
_ _ 4 ¸ ,_
Co_
ect
_,
_o _,,_ _ s_s
_'
_
1. To help minimize vibration, route drain hose to avoid contact
with motor, door springs, water line, cabinet, flooring or the
edge of the hole where it passes through the cabinet.
2. Do not remove drain loop from side of dishwasher.
3=
4.
5=
6=
A. Drain loop
Place pan under end of drain hose. Pan will collect any water
in drain hose.
Place the smaller drain hose clamp onto the small end of the
drain hose.
A\_
*\\
A. Hose clamp
Push the drain hose into the connector up to the stop on the
drain hose.
A. Connector
B. Stop
User pliers to open clamp and slide clamp onto connector
between stops on connector as shown.
B
A. Hose clamp
B. Stops
18