IKEA MDB8959SBW0 Manual de instrucciones de instalación - Página 21

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Lavavajillas IKEA MDB8959SBW0. IKEA MDB8959SBW0 48 páginas. Undercounter dishwasher stainless steel tub

Imprimir página

Connect wires black to black and white to white, using UL

Listed/CSA Approved twist-on wire connectors (not included).

If needed, see website for animated representation

of this step.

Visit www.whirlpool.com/electrical

under FAQ tab.

Tighten strain relief screws to secure cable.

Place wires inside terminal box. Insert tabs on left side of cover.

Make sure wires are tucked inside box. Close cover ensuring

wires are not pinched. Use 1/4"nut driver or Torx T20 screwdriver

and previously removed screw to secure cover.

Check that dishwasher is still level front-to-back

and side-to-side

in cabinet opening.

Open dishwasher door, remove lower dish rack, and place towel

over pump assembly and lower spray arm of dishwasher. This will

keep screws from falling into pump area when you are securing

the dishwasher.

NOTE: Do not drop screws into bottom of dishwasher.