Gap Diagnostic EASControl Manual de uso y propiedad - Página 16

Navegue en línea o descargue pdf Manual de uso y propiedad para Equipos de diagnóstico Gap Diagnostic EASControl. Gap Diagnostic EASControl 17 páginas.

Imprimir página

5.2.2 Activation using the Integrated (II) Interface

Steps to activate the IIDTool using the Intergrated (II) Interface.

1- Turn ignition ON without starting the engine (turning the key to "ON, II" or press the "start en-

gine" button without simultaneously pressing the brake pedal).

2- Connect the IIDTool on the OBDII connector

3- Wait 30 seconds until the " IIDTool Ready " message is displayed on the instrument pack screen.

This delay is caused by the scan process which detects which ECUs are present.

4- Lunch the Integrated Interface by pressing on the

5- Reach the activation code by browsing through the menus as follows : Menu - > IIDTool Config

- > Unlock Code

6- Note the 10 character activation code.

Note : It is possible to scroll the code from left to right if required with the

7- Send us the activation code by e-mail at

8- Following receipt of the unlock code as a reply to your e-mail (during operating hours

only), return to the vehicle, repeat steps 1 to 5

9- Enter the Unlock Code using the corresponding commands

10- Once the unlock code is entered correctly, the IIDTool will backup the suspension calibration

and Car Configuration File (CCF). A confirmation of execution will be displayed.

The user has now access to advanced programming functions and data backup.

[email protected]

Transfer of ownership

button.

guide,

and

buttons.