IKEA RENLIG Manual del usuario - Página 21

Navegue en línea o descargue pdf Manual del usuario para Lavavajillas IKEA RENLIG. IKEA RENLIG 28 páginas. Integrated dishwasher
También para IKEA RENLIG: Manual del usuario (18 páginas), Manual (32 páginas), Manual de instrucciones (32 páginas), Instrucciones de uso (42 páginas), Manual (20 páginas)

Imprimir página

ENGLISH

Problem

Possible cause

The filter in the inlet hose or the in-

let valve filter are blocked (The red

indicator light of button 4 blinks).

The door is not properly closed

(The red indicator light of button 4

blinks).

The drain hose is squashed or

kinked (The red indicator light of

button 4 blinks).

The appliance

The drain filter is clogged (The red

does not emp-

indicator light of button 4 blinks).

ty:

An option or a programme that

ends with the water still in the tub

or a that eliminates all the spinning

phases has been selected.

The electronic unbalance detection

device has cut in because the laun-

dry is not evenly distributed in the

drum. The laundry is redistributed

The appliance

by reverse rotation of the drum.

spinning phase

This may happen several times be-

starts late or

fore the unbalance disappears

does not start:

and normal spinning can resume.

If, after 10 minutes, the laundry is

still not evenly distributed in the

drum, the appliance will not spin.

Too much detergent or unsuitable

detergent (creates too much foam)

has been used.

Check whether there are any leaks

from one of the inlet hose fittings. It

is not always easy to see this as

the water runs down the hose;

There is water

check to see if it is damp.

on the floor:

The drain or inlet hose is dam-

aged.

The cap on the emergency empty-

ing hose has not been replaced or

the filter has not been properly

screwed in after cleaning action.

Solution

Clean the water inlet filters. (See

"Cleaning the water inlet filters"

for more details).

Close the door firmly.

Check the drain hose connection.

Clean the drain filter.

Select the draining or spinning

programme.

Redistribute the load manually or

load more laundry and select the

spin programme.

Reduce the detergent quantity or

use another one.

Check the water inlet hose connec-

tion.

Replace it with a new one (check

with the After Sales Service the

right spare part number).

Refit the cap on the emergency

emptying hose or screw the filter

fully in.