GAPOSA SileoXS XSDC3EX030BC Manual de inicio rápido - Página 8

Navegue en línea o descargue pdf Manual de inicio rápido para Persianas GAPOSA SileoXS XSDC3EX030BC. GAPOSA SileoXS XSDC3EX030BC 8 páginas. Ultra quiet motorization

Imprimir página

13. DELETING A TRANSMITTER OR A CHANNEL

14.ERASE TRANSMITTER MEMORY (DELETING ALL THE

TRANSMITTERS OR CHANNELS OR SENSORS)

Option 1 - Using a programmed transmitter

Press and hold both the PROG-TX and STOP

buttons for at least 15 seconds: to confim

that the operation has completed, the

motor first makes a brief jog and after

5 seconds it makes an additional jog.

This operation will not work unless it

makes both jogs.

Memory is now empty.

Option 2 - Using a new transmitter without ID

(not paired).

for Li-Ion integrated battery motor

1. Activate sleep mode: click the push

button (the motor makes 2 jogs)

2. Wake up the motor: click the push

button (the motor makes 1 jog)

3. Within 8 seconds, using any Gaposa

transmitter, press and hold both the

PROG-TX and STOP buttons until the

motor makes a long jog.

Memory is now empty

for power operated motor

1. Switch the motor power supply power Off. Then

switch it ON.

2. Within 8 seconds, using any Gaposa transmitter,

press and hold both the PROG-TX and STOP

buttons until the motor makes a long jog.

Memory is now empty

Using the transmitter to be deleted press

and hold both the PROG-TX and STOP

buttons until the motor makes a small jog.

Only the transmitter used for this procedure

has been deleted from motor memory.

<15"

OFF

GAPOSA srl - via Ete, 90 - 63900 Fermo - Italy

T. +39.0734.220701 - F. +39.0734.226389 - [email protected]