Makita 0088381640978 Manual de instrucciones - Página 6
Navegue en línea o descargue pdf Manual de instrucciones para Herramienta eléctrica Makita 0088381640978. Makita 0088381640978 17 páginas. Cordless plate joiner
![Makita 0088381640978 Manual de instrucciones](/uploads/products/server2/2087341/2087341.jpg)
ENGLISH
(Original instructions)
1
Button
2
Red indicator
3
Battery cartridge
4
Pointer
5
Stopper
6
Adjusting screw
7
Lock lever
8
Angle guide
9
Knob
10 Scale
11 Tighten
12 Loosen
13 Down
SPECIFICATIONS
Model
Type of blade ............................................................................................. Plate Joiner
Max. grooving depth................................................................................... 20 mm
–1
No load speed (min
) ............................................................................... 6,500
Overall length ............................................................................................ 351 mm
Net weight ................................................................................................. 3.0 kg
Rated voltage ............................................................................................. D.C. 14.4 V
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-Pro-
cedure 01/2003
Intended use
The tool is intended for cutting crescent shaped slots for
the placement of flat wooden dowels or biscuit by a
plunging action.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future refer-
ence.
CORDLESS PLATE JOINER SAFETY
WARNINGS
1.
Blades must be rated for at least the speed
marked on the tool. Blades running over rated
speed can fly apart and cause injury.
2.
Always use the guard. The guard protects the
operator from broken blade fragments and uninten-
tional contact with the blade.
3.
Use only the blades specified for this tool.
4.
Never operate the tool with the blade locked in
exposed position or without the blade cover
secured properly in place.
5.
Make sure that the blade slides smoothly before
operation.
6
Explanation of general view
14 Up
15 Center of blade thickness
16 Fence
17 Angle scale
18 Blade cover
19 Set plate
20 Thickness of set plate
21 Slide switch
22 Indication lamp
23 Lock nut
24 Plate joiner blade
25 Inner flange
26 Clamp screw
6.
7.
8.
9.
ENE013-1
10. Secure the workpieces firmly with clamp or vise.
11. NEVER wear gloves during operation.
12. Hold the tool firmly with both hands.
13. Keep your hands and body away from the groov-
GEA010-1
14. Run the tool for a while without the blade point-
15. Never reach your hands underneath the work-
16. Do not leave the tool running unattended.
17. Always be sure that the tool is switched off and
GEB093-1
18. Some material contains chemicals which may be
19. Do not use blunt or damaged blades.
20. Do not use the tool with damaged guards.
SAVE THESE INSTRUCTIONS.
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this instruc-
tion manual may cause serious personal injury.
27 Shaft lock
28 Dust bag
29 Fastener
30 Dust nozzle
31 Exhaust vent
32 Inhalation vent
33 Limit mark
34 Holder cap cover
35 Screwdriver
36 Brush holder cap
37 Rubber spike
BPJ140
Check the blades carefully for cracks or damage
before operation. Replace cracked or damaged
blades immediately.
Make sure that the flange fits in the arbor hole
when installing the blade.
Inspect for and remove all nails or foreign matter
from the workpieces before operation.
Always place the workpieces on a stable work-
bench.
ing area.
ing toward anybody. Watch for vibration or wob-
bling that could indicate poor installation or a
poorly balanced blade.
pieces while the blade is rotating.
the battery cartridge is removed before making
any adjustments or replacing the blade.
toxic. Take caution to prevent dust inhalation
and skin contact. Follow material supplier safety
data.
WARNING:
BPJ180
Plate Joiner
20 mm
6,500
351 mm
3.0 kg
D.C. 18 V