Avantco 177MX10H Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Mezclador Avantco 177MX10H. Avantco 177MX10H 12 páginas. Gear driven 10 qt. commercial mixer

User Manual

Installation

Prior to installation the electrical supply to the unit must be checked to ensure it complies to the electrical

rating of the machine as detailed on the serial plate.

The unit must be positioned to ensure there is sufficient space around the machine to operate the controls

and to raise and lower the mixing bowl. It is essential the unit is placed on a sturdy level surface.

WARNING:

The electrical cord on this machine is fitted with a three-pronged grounding plug which must be

connected to properly grounded electrical outlet. If the outlet is not the proper grounding type

contact an electrician. DO NOT remove the grounding prong from the plug!!!

Electrical and grounding connections must comply with the applicable portion of the National

Electrical Code and/or other local electrical codes.

Cleaning

WARNING: DISCONNECT THE MACHINE FROM THE POWER SOURCE BEFORE CLEANING

All new mixer bowls and accessories including whips, beaters, and dough hooks should be properly washed before use.

Wash with hot water and a mild soap solution and then rinse off with either a mild vinegar or soda solution and then rinse

again with clean water. It is highly recommended this cleaning procedure is followed for bowls and accessories prior to

whipping egg whites or whole eggs. The mixer should be cleaned daily with a clean damp cloth.

If the unit has not been used for some time, it is recommended that the procedure above is followed before mixer use. It

is important that the rear bowl lift guides are greased every three months to prevent corrosion.

NOTE！

The bowl safety guard is easily removable for

cleaning. Please see specific instructions on page 5.