Avantco 177MX10H Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Mezclador Avantco 177MX10H. Avantco 177MX10H 12 páginas. Gear driven 10 qt. commercial mixer

Imprimir página
Avantco 177MX10H Manual del usuario
Operating Instructions for Normal Using
STANDARD ACCESSORIES
FIGURE 10
Set the timer #7 to the desired operating time between 1-30 minutes. The timer does not require adjustment for
1
every cycle and will default to pre-set time until changed by the operator.
2
Close the safety guard #3. The unit will not operate if this guard, the bowl #6, and the bowl lift handle #5 are in
the incorrect position.
3
Set the desired mixing speed using the handle #2, suitable for the attachment fitted and the product being
processed. Please refer to the mixing speed chart on page 8.
After the speed has been selected press the ON button #8. The unit will now run for the timed period set and
4
then switch OFF automatically.
5
The red emergency stop button if operated will shut down the machine at any time during the time cycle.
ALWAYS TURN OFF THE MACHINE BEFORE CHANGING SPEEDS. FAILURE TO DO SO MAY
OPERATION INSTRUCTION
DAMAGE THE GEARBOX AND VOID THE WARRANTY.
OPERATION INSTRUCTION
ALSO MAKE SURE THAT THE BOWL IS IN THE FULLY LIFTED POSITION AND THE SAFETY AND
OPERATION INSTRUCTION
THE SAFETY GUARD IS CLOSED.
Low speed is position #1 and the knob will be facing forwards.
Please ensure power supply matches your machine
Medium speed is position #2 and the knob will be facing up.
Please ensure power supply matches your machine.
High speed is position #3 and the knob will be facing down.
Please ensure power supply matches your machine
NEMA 5015P
110V
Please ensure power supply matches your machine
Please ensure power supply matches your machine.
STANDARD ACCESSORIES
ALWAYS USE THE CORRECT ATTACHMENT FOR THE JOB.
NEMA 5015P
110V
Please ensure power supply matches your machine.
110V
NEMA 5015P
110V
110V
A. Whip:
FOR CHANGING THE SPEED: Please stop machine first
110V
OFF
before changing speed in order to avoid damage to the gear box
FOR CHANGING THE SPEED: Please stop machine first
12
OFF
FOR CHANGING THE SPEED: Please stop machine first
B. . Flat Beater:
before changing speed in order to avoid damage to the gear box
FOR CHANGING THE SPEED: Please stop machine first
before changing speed in order to avoid damage to the gear bo
OFF
before changing speed in order to avoid damage to the gear box
FOR CHANGING THE SPEED: Please stop machine first
before changing speed in order to avoid damage to the gear bo
FOR CHANGING THE SPEED: Please stop machine first
MIXING: According to the different mixing material.
C.
before changing speed in order to avoid damage to the gear bo
Choose the different mixing devicews and speed.
MIXING: According to the different mixing material.
MIXING: According to the different mixing material.
Choose the different mixing devicews and speed.
MIXING: According to the different mixing material.
Choose the different mixing devicews and
Choose the different mixing devicews and speed.
MIXING: According to the different mixing material.
Choose the different mixing devicews and
MIXING: According to the different mixing material.
Using The Attachment Hub
A. Be suitable for mix and stir batter, eggs and work with
Choose the different mixing devicews and
in speed speed, working time isless than 15 minutes.
A. Be suitable for mix and stir batter, eggs and work with
A
A. Be suitable for mix and stir batter, eggs and work with
in speed speed, working time isless than 15 minutes.
A. Be suitable for mix and stir batter, eggs and work with
in speed speed, working time isless than 15 minutes
in speed speed, working time isless than 15 minutes.
A
1. Turn the mixer off and remove any agitator attachment.
A. Be suitable for mix and stir batter, eggs and work with
A
in speed speed, working time isless than 15 minutes
A. Be suitable for mix and stir batter, eggs and work with
2. Loose the hub mounting screw and remove the attachment hub cover.
B. Be suitable for mix and stir stuffing and raw material, and
in speed speed, working time isless than 15 minutes
3. Insert and align the attachment shaft into the attachment hub, ensure that the attachment is fully inserted.
work in middle speed, working time is less than 20 mins.
B
B. Be suitable for mix and stir stuffing and raw material, and
4. Tighten the hub mounting screw.
B. Be suitable for mix and stir stuffing and raw material, and
work in middle speed, working time is less than 20 mins.
B. Be suitable for mix and stir stuffing and raw material, and
B
work in middle speed, working time is less than 20
work in middle speed, working time is less than 20 mins.
B
B. Be suitable for mix and stir stuffing and raw material, and
!
NEVER RUN THE MIXER WITH HUB ACCESSORY AND AGITATOR AT THE SAME TIME
work in middle speed, working time is less than 20
B. Be suitable for mix and stir stuffing and raw material, and
C. Middle position is suitable for mixing dough, working time
work in middle speed, working time is less than 20
is less than 30 minutes. Flour/ water quantity is 40%-50%.
C
C. Middle position is suitable for mixing dough, working time
C. Middle position is suitable for mixing dough, working time
is less than 30 minutes. Flour/ water quantity is 40%-50%.
C. Middle position is suitable for mixing dough, working time
C
is less than 30 minutes. Flour/ water quantity is
is less than 30 minutes. Flour/ water quantity is 40%-50%.
C
C. Middle position is suitable for mixing dough, working time
is less than 30 minutes. Flour/ water quantity is
C. Middle position is suitable for mixing dough, working time
www.AvantcoEquipment.com
is less than 30 minutes. Flour/ water quantity is
STANDARD ACCESSORIES
ITEM
DESCRIPTION
QTY
1
Spatula
1
2
Dough Hook
1
3
Wisk
1
4
Bowl
1
NOTES:
• Any agitator is easily installed by sim-
ply raising it onto the mixing axle, and
the rotating it clockwise on the shaft
until into place. To remove, raise the
agitator on the shaft until it clears the
lock and then rotate counter-clockwise
and lower.
• All of tools are precisely fitted to the
bowl, rounded corners and easily
removable for cleaning.
SPANISH:
• Any agitator is easily installed by sim-
ply raising it onto the mixing axle, and
the rotating it clockwise on the shaft
until into place. To remove, raise the
agitator on the shaft until it clears the
lock and then rotate counter-clockwise
and lower.
FIGURE 10
• All of tools are precisely fitted to the
Suitable for mixing liquids and soft ingredients, can work in all speeds.
bowl, rounded corners and easily
Do not run for more than 15 minutes.
removable for cleaning.
Suitable for mixing dry ingredients , can work in low & medium speeds only.
Do not use in high speed. Do not run for more than 15 minutes.
Dough Hook:
Suitable for mixing dough, can work in low speed only. Do not use in high speed.
Do not run for more than 20 minutes. Absorption ratio must be more than 50%. Refer to mixer
capacity chart.
User Manual
FIGURE 10
OPERATION INSTRUCTION
ITEM
DESCRIPTION
1
Spatula
2
Dough Hook
Please ensure power supply matches your machine
3
Wisk
Please ensure power supply matches your machine.
4
Bowl
NEMA 5015P
110V
NOTES:
110V
• Any agitator is easily installed by sim-
ply raising it onto the mixing axle, and
the rotating it clockwise on the shaft
FOR CHANGING THE SPEED: Please stop machine first
until into place. To remove, raise the
OFF
agitator on the shaft until it clears the
before changing speed in order to avoid damage to the gear box
lock and then rotate counter-clockwise
FOR CHANGING THE SPEED: Please stop machine first
and lower.
before changing speed in order to avoid damage to the gear bo
• All of tools are precisely fitted to the
bowl, rounded corners and easily
removable for cleaning.
MIXING: According to the different mixing material.
Choose the different mixing devicews and speed.
SPANISH:
• Any agitator is easily installed by sim-
MIXING: According to the different mixing material.
ply raising it onto the mixing axle, and
Choose the different mixing devicews and
the rotating it clockwise on the shaft
until into place. To remove, raise the
agitator on the shaft until it clears the
A. Be suitable for mix and stir batter, eggs and work with
lock and then rotate counter-clockwise
in speed speed, working time isless than 15 minutes.
and lower.
A
A. Be suitable for mix and stir batter, eggs and work with
• All of tools are precisely fitted to the
in speed speed, working time isless than 15 minutes
bowl, rounded corners and easily
removable for cleaning.
B. Be suitable for mix and stir stuffing and raw material, and
12
work in middle speed, working time is less than 20 mins.
B
B. Be suitable for mix and stir stuffing and raw material, and
work in middle speed, working time is less than 20
C. Middle position is suitable for mixing dough, working time
is less than 30 minutes. Flour/ water quantity is 40%-50%.
C
C. Middle position is suitable for mixing dough, working time
is less than 30 minutes. Flour/ water quantity is
speed.
speed.
speed.
ITEM
DESCRIPTION
1
Spatula
2
Dough Hook
3
Wisk
mins.
4
Bowl
mins.
NOTES:
mins.
• Any agitator is easily installed by sim-
ply raising it onto the mixing axle, and
the rotating it clockwise on the shaft
40%-50%.
until into place. To remove, raise the
agitator on the shaft until it clears the
40%-50%.
lock and then rotate counter-clockwise
40%-50%.
and lower.
OPERATION INSTR
Please ensure power supply m
Please ensure power supply m
NEMA 5015P
110V
110V
FOR CHANGING THE SPEED:
OFF
before changing speed in order t
FOR CHANGING THE SPEED:
before changing speed in order t
MIXING: According to the diff
QTY
Choose the different mixing d
1
MIXING: According to the diff
1
Choose the different mixing d
1
1
A. Be suitable for mix and stir
in speed speed, working time
A
A. Be suitable for mix and stir
in speed speed, working time
B. Be suitable for mix and stir
work in middle speed, working
B
B. Be suitable for mix and stir
work in middle speed, working
C. Middle position is suitable fo
is less than 30 minutes. Flour/
C
C. Middle position is suitable fo
is less than 30 minutes. Flour/
speed.
mins.
40%-50%.
13
110V
OFF
QTY
1
1
1
1
A
B
13
OPERAT
Plea
Plea
FOR
befor
FOR
befor
MIXI
Choo
MIXI
Choo
A. B
in sp
A. B
in sp
B. B
work
7
B. B