Garage Smart Hard Top Lifter Manual del usuario - Página 10
Navegue en línea o descargue pdf Manual del usuario para Sistemas de elevación Garage Smart Hard Top Lifter. Garage Smart Hard Top Lifter 20 páginas.
Imprimir página- 1. Table of Contents
- 2. Safety Information/About Hardtop Lifter
- 3. Product Identifier
- 4. What's in the Box
- 5. Hardtop Lifter Installation Tools and Notes
- 5. Step 1: Smarttrack
- 5. Smarttrack Troubleshooting
- 5. Step 2: Assembly - Length Adjuster
- 5. STEPS 3 & 4: ASSEMBLY - WIDTH ADJUSTER and FOAM BLOCKS
- 5. Step 5: Assembly - Pulley Slider
- 5. Step 6: Assembly - Vehicle Installation
- 5. Step 7: Assembly - Cargo Net and Configuration
- 5. Step 8: Assembly - Adjustments
- 6. Faqs
- 7. Warranty
8
HARDTOP LIFTER INSTALLATION
2. Length Adjuster
1. There are four length adjusters (each with 34 holes), two
narrow (B) and two wide (A). Lay the narrow ones inside
the wide ones with the square holes at opposite ends.
(Fig 2.1a)
Both u-shaped bars open upward. These will later be
pinned in place. (Fig 2.1b)
2. Slide the width adjusters (C) through the square holes as
shown. Align holes with length adjuster openings as
shown. (Fig 2.2)
3. Assemble all six pieces together. (Fig 2.3)
ASSEMBLY
Fig 2.1b
Fig 2.1a
Fig 2.2
Fig 2.3