Garage Smart UNIVERSAL LIFTER Manual de instalación y uso - Página 14

Navegue en línea o descargue pdf Manual de instalación y uso para Sistemas de elevación Garage Smart UNIVERSAL LIFTER. Garage Smart UNIVERSAL LIFTER 20 páginas.

Imprimir página

Part 3: Installing the MyLifter unit

1. Align the holes in the MyLifter bracket with the holes on the Smart Track with the

cable approximately aligned with the starting point.

2. Insert the included spring pins all the way through the holes in the MyLifter bracket

and the Smart Track.

3. Hook the carabiner into the third hole from the lifter on the same side of the Smart

Track as the cable coming off the lifter, and on the side of the lifter where the DC

cable is plugged in.

It is very important that you place the lifter and the carabiner so that the cable

is as vertical as possible when the item is lifted. Excessively angled or crossed

cables could result in damage to the MyLifter motor and to your property and

could cause personal injury.

4. Plug in one end of the DC Power Cable into the Garage Smart Power Adapter.

CAUTION