Makita 3703 Manual de instrucciones - Página 10

Navegue en línea o descargue pdf Manual de instrucciones para Herramienta eléctrica Makita 3703. Makita 3703 20 páginas. Trimmer
También para Makita 3703: Manual de instrucciones (12 páginas)

Imprimir página

Templet guide

The templet guide provides a sleeve through

which the bit passes, allowing use of the

trimmer with templet patterns.

Remove the chip deflector. Loosen the

screws and remove the base protector.

Place the templet guide on the base and re-

place the base protector. Then secure the

base protector by tightening the screws.

Secure the templet to the workpiece. Place

the tool on

t h e

templet and move the tool

with the templet guide sliding along the

side of the templet.

Base

Drotector

Straight bit

4 I

Templet guide 10

Distance ( X )

Workpiece

10 mm

l L

(25/64")

NOTE

The workpiece will be cut a slightly different size from the templet. Allow for the dis-

tance ( X ) between the router bit and the outside of the templet guide. The distance ( X )

can be calculated by using the following equation

Distance ( X )

outside diameter of the templet guide

router bit diameter