Makita 3901 Manual de instrucciones - Página 9
Navegue en línea o descargue pdf Manual de instrucciones para Herramienta eléctrica Makita 3901. Makita 3901 12 páginas. 12-1/4" planer, blade sharpener, plate joiner, chain mortiser, blower, heat gun
También para Makita 3901: Folleto (1 páginas), Manual de instrucciones (16 páginas), Manual de instrucciones (17 páginas)
Imprimir página
1
004598
Clamp the other workpiece to the workbench.
10. For Corner Joint only
004599
Place the tool on the workpiece so that the blade is
facing down.
For T-Butt Joint only
004600
Remove the angle guide from the tool. Place the
tool on the workpiece so that the blade is facing
down.
11.
Repeat the steps 6 - 8 to cut the slots in the
horizontal or the other workpiece.
If you do not need to center the blade in the board
thickness, proceed as follows:
1. For
Edge-To-Edge
Joint
9
For Corner Joint, Miter Joint, Frame Joint and
Edge-To-Edge Joint only
004601
Remove the angle guide from the tool. Set the
•
fence at 90° for Corner Joint, Frame Joint and
Edge-To-Edge Joint or at 45° for Miter Joint.
Follow steps 1 - 11 excluding steps 5 and 10
•
described above.
For T-Butt Joint only
004602
004603
Fit the two workpieces together as they will appear
•
in the finished joint position.
Lay the vertical workpiece on the horizontal one.
•
Clamp both workpieces to the workbench.
Remove the angle guide from the tool.
•
Follow the steps 2, 4, 6, 7, 8 and 11 described
•
above.