CORNING LSE 6897-FB Manual de instrucciones - Página 9
Navegue en línea o descargue pdf Manual de instrucciones para Equipos de laboratorio CORNING LSE 6897-FB. CORNING LSE 6897-FB 12 páginas. Digital dry bath heater
Imprimir página
10.0 Cleaning and Maintenance
Make sure that the Corning® LSE™ Digital Dry Bath Heater and block are
cool and the power cord is disconnected before performing any cleaning
or maintenance. Repair or maintenance should only be performed by an
authorized service technician.
The dry bath may be cleaned with a moist cloth containing a mild soap
solution. Do not immerse the dry bath in water or any liquid.
The blocks may also be cleaned in a mild soapy solution. Be sure that all
items have thoroughly dried before attempting to connect the cord or use
the unit.
Spills: In the event liquid is accidentally spilled into the bath or well area,
disconnect the plug from the outlet and turn the unit upside down to
minimize liquid contact with the internal components. Remove the bottom
cover and inspect to assure liquid has not contacted heater elements,
electronic controls, or connectors. Have a qualified service technician clean
the unit and replace any damaged parts.
11.0 Equipment Disposal – European Regulations
According to Directive 2012/19/EU of the European Parliament and of the
Council of 4 July 2012 on waste electrical and electronic equipment (WEEE),
the Corning LSE Digital Dry Bath Heater is marked with the crossed-out
wheeled bin and must not be disposed of with domestic waste.
Consequently, the buyer shall follow the instructions for reuse and recycling
of waste electronic and electrical equipment (WEEE) provided with the
products and available at the following link: www.corning.com/weee
12.0 Appendix: Symbols and Conventions
The following chart is an illustrated glossary of the symbols that may be
used in this manual or on the product.
CAUTION: This symbol refers you to important operating
and maintenance (servicing) instructions within the product
Instruction Manual. Failure to heed this information may
present a risk of damage or injury to persons or equipment.
ATTENTION: Hot Surface.
Indicates disposal instruction.
DO NOT throw this unit into a municipal trash bin when this
unit has reached the end of its lifetime. To ensure utmost
protection of the global environment and minimize pollution,
please recycle this unit.
7