Makita 4324 Manual de instrucciones - Página 12
Navegue en línea o descargue pdf Manual de instrucciones para Herramienta eléctrica Makita 4324. Makita 4324 16 páginas. Jig saw
También para Makita 4324: Manual de piezas (2 páginas), Manual de instrucciones (19 páginas), Manual de instrucciones (10 páginas)
Imprimir página
2) Circular cuts
When cutting circles or arcs of 170 mm (6-1 1/16") or less in radius, install the rip fence
as follows.
Insert the rip fence into the rectangular hole on the side of the tool base with the fence
guide facing up. Insert the circular guide pin through the either of the two holes on the
fence guide. Screw the threaded knob onto the pin to secure the pin. Now slide the rip
fence to the desired cutting radius, and tighten the bolt to secure it in place. Then
move the tool base all the way forward.
3
Threaded knob
I
-
I
,
Anti-splintering device
(optional accessory)
For splinter-free cuts, the anti-splintering
device can be used. To install the anti-
splintering device, move the tool base all
the way forward and insert it between the
two protrusions of the tool base.
CAUTION:
The anti-splintering device cannot be used
when making bevel cuts.
Anti-splintering device
12