Makita 4324 Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Herramienta eléctrica Makita 4324. Makita 4324 16 páginas. Jig saw
También para Makita 4324: Manual de piezas (2 páginas), Manual de instrucciones (19 páginas), Manual de instrucciones (10 páginas)

Imprimir página

Loosen the bolt on the back of the tool

base with the hex wrench. Move the tool

base so that the bolt is positioned in the

center of the cross-shaped slot in the tool

base.

Tilt the tool base until the desired bevel

angle is obtained. The edge of the motor

housing indicates the bevel angle. Check

the contact between the back edge of the

blade and the roller, then tighten the bolt to

secure the tool base.

Front flush cuts

Loosen the bolt on the back of the tool

base with the hex wrench, then move the

tool base all the way back. Then tighten the

bolt to secure the tool base.

1 - 7

Hex wrench

Indicate