Makita 4326M Manual de instrucciones - Página 9
Navegue en línea o descargue pdf Manual de instrucciones para Herramienta eléctrica Makita 4326M. Makita 4326M 13 páginas. Jig saw
También para Makita 4326M: Especificaciones (2 páginas), Información técnica (7 páginas)
Imprimir página
Rip fence (optional accessory)
CAUTION:
•
Always be sure that the tool is switched off
and unplugged before installing or removing
accessories.
1. Straight cuts
Steel base type
1. Rip fence (Guide rule)
When repeatedly cutting widths of 160 mm or less, use
of the rip fence will assure fast, clean, straight cuts.
Aluminum base type
1. Rip fence (Guide rule)
To install, insert the rip fence into the rectangular
hole on the side of the base with the fence guide
facing down. Slide the rip fence to the desired cut-
ting width position, then tighten the bolt to secure it.
3
1. Hex wrench 2. Bolt 3. Rip fence (Guide rule) 4. Guide
facing
1
Steel base type
1
4
2
1
2
1. Bolt 2. Fence guide 3. Hex wrench 4. Rip fence
(Guide rule)
2. Circular cuts
1
1. Treaded knob 2. Guide facing 3. Rip fence (Guide
rule) 4. Pin
4
1. Threaded knob 2. Pin 3. Rip fence (Guide rule)
4. Fence guide
9 ENGLISH
Aluminum base type
Steel base type
1
2
3
4
Aluminum base type
3
4
1
2
3