Makita 4329 Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Herramienta eléctrica Makita 4329. Makita 4329 13 páginas. Jig saw
También para Makita 4329: Manual de instrucciones (13 páginas), Especificaciones (2 páginas), Manual de instrucciones (13 páginas), Información técnica (7 páginas), Manual de instrucciones (13 páginas)

To install the blade, loosen the bolt counterclockwise on

the blade holder with the hex wrench.

With the blade teeth facing forward, insert the blade into

the blade holder as far as it will go. Make sure that the

back edge of the blade fits into the roller. Then tighten

the bolt clockwise to secure the blade.

► 1 . Bolt 2. Blade 3. Roller

To remove the blade, follow the installation procedure

in reverse.

NOTE:

•

Occasionally lubricate the roller.

Hex wrench storage

► 1 . Hook 2. Hex wrench

When not in use, store the hex wrench as shown in the

figure to keep it from being lost.

Adjusting roller (For models

4326/4326M/4327/4327M)

► 1 . Blade 2. Roller 3. Retainer 4. Hex wrench 5. Bolt

Loosen the bolt on the back of the base with the hex

wrench. Move the retainer so that the roller contacts the

blade lightly. Then tighten the bolt to secure the base

and the retainer.

NOTE:

•

Dust cover

► 1 . Dust cover

•

Lower the dust cover to prevent chips from flying.

However, when making bevel cuts, raise it all the way.

6 ENGLISH

6. Base

Occasionally lubricate the roller.

CAUTION:

Always wear safety goggles even when operat-

ing the tool with the dust cover lowered.