HIKVISION DS-7208HTI-K2 Manual de inicio rápido - Página 8

Navegue en línea o descargue pdf Manual de inicio rápido para DVR HIKVISION DS-7208HTI-K2. HIKVISION DS-7208HTI-K2 15 páginas.

M E N U O P E R A T I O N ( c o n t i n u e d )

 User Logout, Shutdown, and Reboot

You can log out of the system, shut down, or reboot the device upon demand.

1. Go to Menu > Shutdown.

2. Click Logout, Shutdown, or Reboot.

After logging out of the system,

menu operation on the screen is

invalid. A user name and

password must be entered to

unlock the system.

 Viewing Signal Input Status

The analog signal inputs (TurboHD, AHD, HD-CVI, CVBS) and IP signal input can be recognized and

connected automatically. For some DVR series, you can configure 5 MP long distance transmission on the

Signal Input Status interface. For other models, there is no Signal Input Status interface.

The following steps are for configuring 5 MP long distance transmission for DVRs that support

this feature.

1. Go to Menu > Camera > Signal Input

Status.

2. Click

to enter the 5 MP Long Distance

Transmission Settings interface.

3. Check the channel(s) to enable 5 MP long

distance transmission.

4. Click Apply to save the settings and OK

to return to the Signal Input Status

interface.

www.a1securitycameras.com email: [email protected]

Available from A1 Security Cameras

Figure 1-10 Logout

Figure 1-11 Signal Input Status

Figure 1-12 5 MP Long Distance Transmission Settings

Rev. 010918NA