Makita 4350FCT Manual de instrucciones - Página 2
Navegue en línea o descargue pdf Manual de instrucciones para Herramienta eléctrica Makita 4350FCT. Makita 4350FCT 13 páginas. Jig saw
También para Makita 4350FCT: Especificaciones (2 páginas), Desglose de piezas (3 páginas), Manual de instrucciones (13 páginas), Manual de instrucciones (13 páginas), Información técnica (14 páginas)
Imprimir página
SPECIFICATIONS
Model
Length of stroke
Max. cutting capacities
-1
Strokes per minute (min
)
Overall length
Net weight
Safety class
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
Weight according to EPTA-Procedure 01/2014
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
DOUBLE INSULATION
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of the European Directive,
on Waste Electric and Electronic
Equipment and its implementation in
accordance with national law, electric
equipment that have reached the end of
their life must be collected separately and
returned to an environmentally compatible
recycling facility.
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-2-11:
Model 4350T
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Model 4350CT, 4350FCT
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Wood
Steel
Aluminum
) : 83 dB (A)
pA
) : 94 dB (A)
WA
) : 84 dB (A)
pA
) : 95 dB (A)
WA
4350T
26 mm
135 mm
10 mm
20 mm
2,800
236 mm
2.7 kg
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-2-11:
Model 4350T
Work mode : cutting boards
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : cutting sheet metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model 4350CT, 4350FCT
Work mode : cutting boards
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : cutting sheet metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
2 ENGLISH
4350CT
4350FCT
26 mm
26 mm
135 mm
135 mm
10 mm
10 mm
20 mm
20 mm
800 - 2,800
800 - 2,800
236 mm
236 mm
2.7 kg
2.7 kg
/II
2
) : 7.0 m/s
h,B
2
2
) : 4.5 m/s
h,M
2
2
) : 7.5 m/s
h,B
2
2
) : 4.5 m/s
h,M
2