Makita 4351CT Información técnica - Página 7

Navegue en línea o descargue pdf Información técnica para Herramienta eléctrica Makita 4351CT. Makita 4351CT 15 páginas. Jig saw
También para Makita 4351CT: Especificaciones (2 páginas), Manual de instrucciones (13 páginas), Manual de instrucciones (13 páginas), Manual de instrucciones (9 páginas)

Imprimir página

epair

[7] Disassembling blade holder

1. Disassemble Rod with referring to [ 5] Disassembling Gear housing cover section in page 4.

2. Disassemble Dust cover, and then disassemble Retaining ring R-18 as illustrated in Fig. 18.

Blade holder and Torsion spring 15 are separated from Rod as illustrated in Fig. 19.

Fig. 18

Dust cover

Retaining

ring R-18

Rod

Blade holder

[8] Assembling blade holder

1. Apply Makita grease FA No.2 to Push pin.

Insert Push pin to Rod.

Insert the short hook end of Torsion spring 15 to Rod. (Fig. 20)

2. Align the mark of Blade holder and the long hook end of Push pin, and then cover Blade holder on Rod with Torsion

spring 15. (Fig. 21)

3. Bring the long hook end to the space A of Blade holder by turning clockwise. (Fig. 22)

Fig. 20

Rod

Hole for

Push pin

The short hook end

of Torsion spring 15

4. Push Rod into Blade holder, and then assemble Retaining ring R-18 to the groove in Blade holder. (Fig. 23)

5. Install Dust cover as illustrated in Fig.24.

Fig. 23

Retaining ring R-18

Fig. 19

Note: Be careful not to lose Push pin when disassembling.

Fig. 21

Hole for

The long hook end

Torsion

of Torsion spring 15

spring 15

The mark of

Blade holder

Fig. 24

Dust cover

Push pin

Blade holder

Fig. 22

The long hook end of Torsion

spring 15

Blade

holder

P 7 / 15

Torsion spring 15

Space A

Press dust cover

to Blade holder.