CORNING UAT3 Manual de instrucciones - Página 3

Navegue en línea o descargue pdf Manual de instrucciones para Herramientas CORNING UAT3. CORNING UAT3 18 páginas.

Precautions

2.1

General Precautions

CAUTION: Recommend the use of safety glasses (spectacles)

conforming to ANSI Z87, for eye protection from accidental

injury when handling chemicals, cables or fiber. Pieces of glass

fiber are very sharp and have the potential to damage the eye.

CAUTION: The wearing of cut-resistant safety gloves to

protect your hands from accidental injury when using sharp-

bladed tools and armored cable is strongly recommended.

Use extreme care when working with severed armor. There

will be a sharp edge where armor is cut. To minimize the

chance of injury from the cut armor, cover the exposed edge

with a wrap of electrical tape. To minimize the chance of

injury from sharp-bladed tools, always cut away from yourself

and others. Dispose of used blades and armor scrap properly.

2.2

Tool Handling Precautions

CAUTION: Never adjust the blade heights with the tool closed,

or close the tool halves together unless the blades are fully

retracted. Failure to follow this precaution may result in

damage to the blade tips.

2.3

Tube Handling Precautions

CAUTION: Buffer tubes are sensitive to excessive pulling,

bending, and crushing forces. Great care should be used when

handling buffer tubes. Excessive bending will cause kinking

which may damage the fibers inside..

2.4

Chemical Precautions

WARNING: Isopropyl alcohol is flammable with a flashpoint

at 54°F. It can cause irritation to eyes on contact. In case

of contact, flush eyes with water for at least 15 minutes.

Inhalation of vapors irritates the respiratory tract. Exposure

to high concentrations has a narcotic effect, producing

symptoms of dizziness, drowsiness, headache, staggering,

unconsciousness, and possibly death.

Standard Recommended Procedure 004-074 | Issue 12 | May 2017 | Page 3 of 18