JAMEC PEM TDR4000 Manual de instrucciones - Página 2
Navegue en línea o descargue pdf Manual de instrucciones para Herramienta eléctrica JAMEC PEM TDR4000. JAMEC PEM TDR4000 4 páginas. Tyre inflator
Imprimir páginaTDR4000 Automatic
Tyre Inflator
Thank you for selecting this Jamec Pem
TDR4000 Tyre Inflator. Please read this manual
before carrying out any installation or service
procedure. This manual is an integral and
essential part of the product, please keep
it away from damp, heat, dust, oils, do not
remove, tear or amend any parts of the manual
for any reason. It must be made available to the
operator and to maintenance personnel, also
to ensure staff training. If you lose or damage
the manual, ask the manufacturer for a copy,
quoting the Part No. The manual must always
remain with the machine, in the event of the
machine being sold, it must be given to the
new user. The manufacturer reserves the right
to change product features at any time without
notice.
IMPORTANT
This tyre inflator must only be connected to
air line systems which have clean dry air. Any
moisture in the air line system may cause
damage to the operation of this tyre inflator
and void warranty.
Air pre-filters must be used with this inflator
to ensure product accuracy and longevity.
Features
Auto ON, upon air pressure sensing
■
Large tilted LCD display with backlight and
■
90 second auto OFF
IP rating = IP44
■
Multi scale gauge
■
Die cast aluminium unit with impact bumper
■
and lightweight ABS handle and trigger
Supplied with official calibration certificate
■
Wire sheathed hose on flex area of hose to
■
eliminate kinking
Lightweight and robust
■
Complies with EN12645: 2014*
■
2
Operation
To read pressure:
■
Remove tyre valve cap.
With clip-on air chuck lever depressed, firmly
press chuck onto tyre valve stem and release
lever, ensure that no air leaks.
Check pressure gauge, the digital display
will activate once the tyre pressure is sensed.
If no pressure is sensed the display will not
turn on. Press the tyre inflator lever to add air
into the tyre, before reading the pressure.
To inflate:
■
With clip-on air chuck lever depressed,
firmly press chuck onto tyre valve stem and
release lever, ensure that no air leaks.
Fully depress the tyre inflator lever for an
appropriate period of time and release the lever.
Check pressure gauge and repeat the
procedure until correct pressure level is
achieved.
To deflate:
■
With clip-on air chuck lever depressed,
firmly press chuck onto tyre valve stem and
release lever, ensure that no air leaks.
Depress the tyre inflator lever half way (until
air can be heard to be escaping) for an
appropriate period of time and release the lever.
Check pressure gauge and repeat the
procedure until correct pressure level is
achieved.
Safety
Never exceed the maximum pressure of
■
the tyre.
Check that the hose and chuck are in good
■
condition with no damage or cracks.
Ensure safe working environment when
■
using compressed air.
Return to authorised service agent for repair
■
and maintenance.