Makita 6706DW Manual de instrucciones - Página 5

Navegue en línea o descargue pdf Manual de instrucciones para Herramienta eléctrica Makita 6706DW. Makita 6706DW 8 páginas. Cordless angle socket driver
También para Makita 6706DW: Lista de piezas (2 páginas)

Imprimir página

21. Disposal of battery

– Ensure battery is disposed of safety as instructed

by the manufacturer.

IMPORTANT SAFETY INSTRUCTIONS

FOR CHARGER & BATTERY

CARTRIDGE

1. SAVE THESE INSTRUCTIONS — This manual

contains important safety and operating

instructions for battery charger.

2. Before using battery charger, read all instruc-

tions and cautionary markings on (1) battery

charger, (2) battery, and (3) product using

battery.

3. CAUTION — To reduce risk of injury, charge

only MAKITA type rechargeable batteries.

Other types of batteries may burst causing

personal injury and damage.

4. Do not expose charger to rain or snow.

5. Use of an attachment not recommended or

sold by the battery charger manufacturer may

result in a risk of fire, electric shock, or injury

to persons.

6. To reduce risk of damage to electric plug and

cord, pull by plug rather than cord when dis-

connecting charger.

7. Make sure cord is located so that it will not be

stepped on, tripped over, or otherwise sub-

jected to damage or stress.

8. Do not operate charger with damaged cord or

plug — replace them immediately.

9. Do not operate charger if it has received a

sharp blow, been dropped, or otherwise dam-

aged in any way; take it to a qualified service-

man.

10. Do not disassemble charger or battery car-

tridge; take it to a qualified serviceman when

service or repair is required. Incorrect reas-

sembly may result in a risk of electric shock or

fire.

11. To reduce risk of electric shock, unplug

charger from outlet before attempting any

maintenance or cleaning. Turning off controls

will not reduce this risk.

ADDITIONAL SAFETY RULES FOR

CHARGER & BATTERY CARTRIDGE

1. Do not charge battery cartridge when tempera-

ture is BELOW 10°C (50°F) or ABOVE 40°C

(104°F).

2. Do not attempt to use a step-up transformer,

an engine generator or DC power receptacle.

3. Do not allow anything to cover or clog the

charger vents.

4. Always cover the battery terminals with the

battery cover when the battery cartridge is not

used.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any con-

ductive material.

(2) Avoid storing battery cartridge in a con-

tainer with other metal objects such as

nails, coins, etc.

(3) Do not expose battery cartridge to water or

rain.

A battery short can cause a large current flow,

overheating, possible burns and even a break-

down.

6. Do not store the machine and battery cartridge

in locations where the temperature may reach

or exceed 50°C (122°F).

7. Do not incinerate the battery cartridge even if

it is severely damaged or is completely worn

out. The battery cartridge can explode in a fire.

8. Be careful not to drop, shake or strike battery.

9. Do not charge inside a box or container of any

kind. The battery must be placed in a well

ventilated area during charging.

ADDITIONAL SAFETY RULES

FOR MACHINE

1. Be aware that this machine is always in an

operating condition, because it does not have

to be plugged into an electrical outlet.

2. Always be sure you have a firm footing. Be

sure no one is below when using the machine

in high locations.

3. Hold the machine firmly.

4. When driving into walls, floors or wherever

''live'' electrical wires may be encountered, DO

NOT TOUCH ANY METAL PARTS OF THE

MACHINE! Hold the machine only by the insu-

lated grasping surfaces to prevent electric

shock if you drive into a ''live'' wire.

5. Check the socket carefully for wear, cracks or

damage before installation.

SAVE THESE INSTRUCTIONS.