HIKVISION DS-7304HFI-S Manual de instalación - Página 5

Navegue en línea o descargue pdf Manual de instalación para DVR HIKVISION DS-7304HFI-S. HIKVISION DS-7304HFI-S 7 páginas. Ds-7300hfi-s series

The RS-485 PTZ control should be connected with

Note:

the T+ and T- pin on the RS-485 terminal block.

Controller Connection

alarm shop

To connect a controller to the DVR:

1. Disconnect pluggable block from the KB terminal block.

2. Unfasten stop screws from the KB D+, D- pluggable

block, insert signal cables into slots and fasten stop

screws. Ensure signal cables are in tight.

3. Connect Ta on controller to D+ on terminal block and Tb

on controller to D- on terminal block. Fasten stop screws.

4. Connect pluggable block back into terminal block.

Note:

Make sure both the controller and DVR are grounded.

Installation Guide - DS-7300HFI-S Series DVR