HIKVISION DS-7332HGHI-SH Manual de inicio rápido - Página 12

Navegue en línea o descargue pdf Manual de inicio rápido para DVR HIKVISION DS-7332HGHI-SH. HIKVISION DS-7332HGHI-SH 17 páginas.

1 3

S E T U P R E C O R D I N G ( c o n t i n u e d )

After recording has been set to Event Recording, go to Motion Detect to set the motion

detection for each camera. In this step, the Copy option is only for analog cameras; IP cameras

need to be configured individually.

Go to RECORDING CONFIGURATION > RECORD QUALITY and set the following items:

• Stream Type enables/disables audio streaming from the cameras (if the camera does not

• Resolution sets recording resolution.

• Bitrate Type saves HDD space when set to Variable. Choices: Variable and Constant.



• Video Quality adjusts picture clarity (medium setting = three green squares is

• Frame Rate sets recording frame rate (12-15 fps is recommended to save HDD space and

• Max Bitrate Mode chooses between pre-set bitrate values and customized values (General

• Max Bitrate (KBPS) is the chosen bitrate for streaming the video.

• Max Bitrate Recommended is the recommended bitrate according to the parameters set.

• Record Audio turns audio recording on/off (available only if camera has a connected

• Video Stream changes recording between Main Stream and Sub Stream (requires restart).

have audio capabilities, Stream Type will have only Video option).







recommended). Medium setting is a balance between good picture and saving HDD space.

prevent "choppy" video).

setting is recommended).

microphone or only analog channels 1-4).

 MAIN STREAM

Select tab

 CAMERA

Select camera

 EVENT

For event recording only (motion

or alarm)

CONTINUOUS

For live view image and

continuous recording

VIDEO QUALITY



Select

to set quality (in example,

sensitivity is set to 3)

number of green squares

