Avantgarde Wilfa BL-1W Manual de instrucciones - Página 15

Navegue en línea o descargue pdf Manual de instrucciones para Licuadora Avantgarde Wilfa BL-1W. Avantgarde Wilfa BL-1W 17 páginas.

The motor must always be switching off before the blender is connected

with the mains supply. (Switch (8) in the '0' setting).

Cutting blades are very sharp. Handle the blender with extreme care and

caution.

This blender only operates if the blending unit has been inserted into the

motor block.

Before switching on the blender, make sure that the blending unit has

been assembled correctly and has been inserted into the motor block

with the lid attached.

The blender is not to be operated with an empty blending unit (i.e.

without solid or liquid foodstuff).

Allow any hot liquids to cool to a lukewarm temperature before you pour

them into the blending unit.

This electrical device complies with the relevant safety regulations.

Repairs are only to be carried out by an authorized electrician.

Improperly carried out repairs can lead to accidents and injury to the

user.

Do not operate the appliance more than 90 second without any loading.

If the supply cord is damaged, its must be replaced by the manufacturer

or its service agent or a similarly qualified person in order to avoid a

hazard.

Technical information

Voltage/frequency: 230V~50Hz (500W)

Glass jug capacity:

Before first use

All parts of the blender are to be thoroughly cleaned before being used

for the first time. (see Section: Cleaning).

Take out the required length of cable from the cable tidy on the base of

the blender and connect the device to the mains supply.

Assembly of the Glass jug

Put the rubber sealing ring (4) on the inner edge of the blade unit (5).

1. Put the rubber sealing ring (4) on the inner edge of the blade unit (5).

2. Put the blade unit with sealing ring into the cup base (6).

1.25 litres