E-Stim Systems ABox Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Equipos de grabación E-Stim Systems ABox. E-Stim Systems ABox 20 páginas. Audio based electro stimulation control unit

Imprimir página

Fitting a battery

3. Remove the old battery (if fitted) and replace with a fresh Alkaline PP3.

The battery connector is polarized so it should not be possible to connect

the battery incorrectly, but ensure the polarity is correct before attempting

connection.

4. Place the battery into the unit and

replace the battery compartment cover.

The cover is fitted with two tabs which

insert into the lower half of the case first,

then the top half of the cover will then

clip into position.

Please note we do NOT recommend the use of standard re-chargeable

batteries in the E-Stim ABox™ unit NiMh re-chargeable, with a terminal voltage

of 8.4V or above may be used with a possible reduction in output power.

In the event the ABox™ is not being used for a period of time, remove the

battery.

1. Ensure the unit is switched off,

and any electrode connection

jacks are disconnected.

2. Turning the unit over and using

fingernail

battery compartment slot, gently

prise the battery compartment

cover out.

5. Turn the unit over. The unit is now ready

for operation.

small

screwdriver

inserted

into

the