Makita BFL300F Manual de instrucciones - Página 7

Navegue en línea o descargue pdf Manual de instrucciones para Herramienta eléctrica Makita BFL300F. Makita BFL300F 17 páginas. Cordless angle screwdriver
También para Makita BFL300F: Información técnica (13 páginas), Manual de instrucciones (13 páginas), Manual de instrucciones (10 páginas)

Imprimir página
Makita BFL300F Manual de instrucciones
FUNCTIONAL
DESCRIPTION
1
2
3
1. Battery cartridge
2. Red part
3. Button
1
1. Switch trigger
A
1
1
1. Reversing switch lever
CAUTION:
•
Always be sure that the tool is switched off and the
battery cartridge is removed before adjusting or
checking function on the tool.

Installing or removing battery cartridge

005736
•
Always switch off the tool before insertion or removal of
the battery cartridge.
•
To remove the battery cartridge, withdraw it from the tool
while sliding the button on the front of the cartridge.
•
To insert the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Always insert it all the way until it locks in
place with a little click. If you can see the red part on the
upper side of the button, it is not locked completely.
Insert it fully until the red part cannot be seen. If not, it
may accidentally fall out of the tool, causing injury to you
or someone around you.
•
Do not use force when inserting the battery cartridge. If
the cartridge does not slide in easily, it is not being
inserted correctly.
Switch action
005737
CAUTION:
•
Before inserting the battery cartridge into the tool,
always check to see that the switch trigger actuates
properly and returns to the "OFF" position when
released.
To start the tool, simply pull the switch trigger. Release the
switch trigger to stop.
Reversing switch action
005738
CAUTION:
•
Always check the direction of rotation before operation.
B
•
Use the reversing switch only after the tool comes to a
complete stop. Changing the direction of rotation before
the tool stops may damage the tool.
•
When not operating the tool, always set the reversing
switch lever to the neutral position.
7