BEROTEC GasGas 700 Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Bastidores y soportes BEROTEC GasGas 700. BEROTEC GasGas 700 4 páginas.

Scope of delivery

» Luggage rack GasGas 700 / KTM 690

» Distances 35mm and 50mm (2 pieces each)

» Screws M8 * 65 (2 pieces)

» Screws M8 * 50 (2 pieces)

» M8 washers (4 pieces)

Mounting

Make sure that all parts listed in the parts list are present. If necessary, have a second person help

you. All parts and connections loosened for assembly must be reassembled in accordance with

the vehicle manufacturer's specifications or replaced with the parts supplied. All screw con-

nections must be tightened to the tightening torques specified by the vehicle manufacturer.

Finally, check whether all parts and connections have been properly mounted. Af-

ter the first 50 km, check the entire assembly and the correct tightening tor-

ques of all screw connections. Carry out visual inspections at regular intervals.

Observe the maximum permissible speed of 130 km/h. The maximum payload de-

pends on the weight distribution, the luggage securing system and the terrain traveled.

The luggage system is fitted in exchange for the original pillion handholds. The screws

supplied must be used. If the factory provided grab handles have not yet been fitted, the

mounting holes in the rear fairing must be fitted according to the manufacturer's speci-

fications.

English