Makita BJV180 Manual de instrucciones - Página 7
Navegue en línea o descargue pdf Manual de instrucciones para Herramienta eléctrica Makita BJV180. Makita BJV180 13 páginas. Cordless jig saw
También para Makita BJV180: Desglose de piezas (3 páginas), Hoja de especificaciones (2 páginas), Manual de instrucciones (13 páginas), Manual de instrucciones (13 páginas), Información técnica (13 páginas), Manual de instrucciones (18 páginas)
Imprimir página
To remove the blade, open the tool opener to the
position shown in the figure. Pull the saw blade out
toward the base.
1
001911
NOTE:
Occasionally lubricate the roller.
•
Hex wrench storage
1
007486
When not in use, store the hex wrench as shown in the
figure to keep it from being lost.
Cover plate
007503
Use the cover plate when cutting decorative veneers,
plastics, etc. It protects sensitive or delicate surfaces
from damage. Fit it on the back of the tool base.
1. Jig saw blade
1. Base
2. Hex wrench
2
1. Cover plate
1
2. Base
2
Anti-splintering device
2
007504
For splinter-free cuts, the anti-splintering device can be
used. To install the anti-splintering device, move the tool
base all the way forward and fit it from the back of tool
base. When you use the cover plate, install the
anti-splintering device onto the cover plate.
CAUTION:
The anti-splintering device cannot be used when
•
making bevel cuts.
Dust extraction
The dust nozzle (optional accessory) is recommended to
perform clean cutting operations.
001921
To attach the dust nozzle on the tool, insert the hook of
dust nozzle into the hole in the base.
The dust nozzle can be installed on either left or right
side of the base.
001922
7
1. Base
2. Anti-splintering
device
1
1. Dust nozzle
1
2. Base
2