Makita BMR100 Manual de instrucciones - Página 4

Navegue en línea o descargue pdf Manual de instrucciones para Herramienta eléctrica Makita BMR100. Makita BMR100 9 páginas. Makita bmr100: specifications
También para Makita BMR100: Desglose de piezas (3 páginas), Manual de instrucciones (20 páginas)

Imprimir página

LCD Display:

A. Radio alarm

B. HWS buzzer alarm

C. Scan tuning

D. Band Indicator

E. Low battery indicator

F. Preset stations

G. Sleep and Snooze status

H. Frequency

Stereo symbol and Volume

J. Clock

K. Time set

L. PM for clock

Battery Installation

Note:

Keeping back up batteries inside the compartment

prevent stored data in preset memories from being lost.

1. Pull out the battery compartment locker to release

battery compartment. There are main battery pack

compartment and back up battery compartment.

2. Remove back up battery compartment cover and

insert 2 fresh UM-3 (AA sizes). Make sure the

batteries are with correct polarity as shown inside the

compartment. Replace the battery cover.

3. BH2433 | BH2420 After back up batteries are inserted,

insert the main battery pack to power radio. The

suitable battery packs for this radio listed as below.

1. Battery

compartment

(covering main

battery pack and

back up

batteries)

2. Battery

compartment

locker

1. Main battery

compartment

2. Back up battery

compartment

Cluster Battery:

9.6V: 9135 | 9134 | 9122 | PA09 | 9120

12V:

1235 | 1234 | 1222 | PA12 | 1220

14.4V: 1435 | 1434 | 1422 | PA14 | 1420

18V:

1835 | 1834 | 1822 | PA18

Slide Battery:

9.6V: BH9033 | BH9033A | BH9020 | BH9020A

12V:

BH1233 | BH1233C | BH1220C

14.4V: BH1433 | BH1420 | BL1430

18V:

BL1830

24V:

BH2433 | BH2420

The following tables indicate the operating time on a

single charge.

Battery Cartridge•Voltage

9.6V

12V

14.4V

PA09

PA12

PA14

9120

1220

1420

–

9122

1222

1422

BH9020

BH1220C

BH1420

BH9020A

9134

1234

1434

1435

9135

1235

BL1430

BH9033

BH1233

BH1433

BH9033A

BH1233C

* Operating time may differ by the type of battery, charging or

operating conditions.

3-1. Installing or removing Slide battery cartridge

• To insert the battery cartridge, align the tongue on the

battery cartridge with the groove in the housing and slip

it into place. Always insert it all the way until it locks in

place with a little click.

• Do not use force when inserting the battery cartridge. If

the cartridge does not slide in easily, it is not being

inserted correctly.

• To remove the battery cartridge, withdraw it from the

tool while sliding the button on the front of the cartridge

or pressing the buttons on both sides of the cartridge.

Operating time*

(At Max. Volume)

18V

24V

PA18

–

Approx. 7 hour

BL1815

–

Approx. 8 hour

1822

BH2420

Approx. 11 hour

1834

–

Approx. 13 hour

1835

–

Approx. 16 hour

BL1830

–

BH2433

Approx. 17 hour

1. Button

2. Battery cartridge

3. Red part