ALIBI ALI-NVR3008P Manual de configuración rápida - Página 2

Navegue en línea o descargue pdf Manual de configuración rápida para Hardware de red ALIBI ALI-NVR3008P. ALIBI ALI-NVR3008P 6 páginas. Embedded network video recorder

Imprimir página

Item

Name

Function

INFO Button

Reserved.

VOIP button

Selecting all items on the list;

In live view or playback mode, it can be used to switch between main and spot video output

MENU button

Press the button will help you return to the Main menu (after successful login).

Press and hold the button for 5 seconds to turn off audible key beep.

PREV button

Switch between single screen and multi-screen mode.

DIRECTION/ENTER buttons

Navigating between different fields and items in menus.

In Playback mode, the UP and DOWN button are used to speed up and slow down recorded video.

The LEFT and RIGHT buttons select the next and previous day of recordings.

In LIVE view mode, these buttons can be used to cycle through channels.

PTZ button

Enter the PTZ Control mode.

ESC button

Return to the previous menu.

Press for Arming/disarming the device in Live View mode.

RESERVED

Reserved for future usage.

F1 button

Selecting all items on the list when used in a list field.

In PTZ Control mode, it will turn on/off PTZ light.

PTZ Control buttons

Buttons to adjust the iris, focus and zoom of a PTZ camera.

F2 button

Cycle through tab pages.

Mouse Control

A standard 3-button (left/right/scroll-wheel) USB mouse can also be used with this NVR. To use a USB mouse:

Plug USB mouse into the either the front panel or backpanel USB connector of the NVR.

The mouse will be automatically detected. If the mouse is not detected, the mouse may not be compatible with the NVR. Please refer

to the recommended device list from your provider.

The operation of the mouse:

Action

Effect

Live view: Show menu.

Right click

Menu: Exit current menu to upper level menu.

Single click: Live view: Select channel and show the quick set menu.

Menu: Select and enter.

Double click: Live view: Switch between single-screen and multi-screen.

Left click

Click and drag: PTZ control: pan, tilt and zoom.

Tamper-proof, privacy mask and motion detection: Select target area.

Digital zoom-in: Drag and select target area.

Live view: Drag channel/time bar

Scroll up: Live view: Previous screen.

Menu: Previous item.

Scroll wheel

Scroll down: Live view: Next screen.

Menu: Next item.

www.Observint.com

Soft keyboard

An on-screen QUERTY keyboard appears when you click in a field that accepts a text entry, such as a password or name. The keyboard is

shown in the following picture. Some control keys toggle their function when they are clicked.

Symbols /

Numbers

Uppercase /

Lowercase

Step 1. Install the NVR and monitor

For the following steps, refer to the back panel photo above for the location of connectors.

Place the NVR in a location that is secure, well ventilated and clean. The NVR should be positioned such that the back panel connectors

are accessible and the ventilation holes on the sides are not blocked.

Install and setup your monitor in accordance with the instructions provided with the monitor. Do not power it on at this time.

Cable the HDMI or VGA connector to your monitor's VGA or HDMI input. The HDMI interface provides the best performance.

Plug the mouse into the USB connector on the front or back of the NVR.

If you plan to access your NVR remotely, or configure your NVR to transmit alerts, email, etc. to external servers, plug a drop cable

from your local area network (LAN) into the RJ-45 LAN connector on the back of the NVR. (By default, the NVR automatically acquires

network settings using DHCP.)

Connect the power cord to the power connector on the back panel of the NVR, and then into a UPS (preferred) or surge protector.

Step 2. Install cameras

Install your security cameras as needed to support your security requirements. Always refer to the documentation provided with the camera

for installation instructions.

Step 3. Connecting it together – initial system setup

Plug the Ethernet cables from the cameras into the RJ-45 camera channel connectors on the back of the NVR. NOTE: Only Alibi or 3S

cameras will function through the camera channel connectors.

Power on the NVR using the power on / off (I / O) switch on the back panel.

Power on the monitor.

Backspace

Escape / Exit

Soft keyboard