Garde rc-watch Instrucciones de uso - Página 2

Navegue en línea o descargue pdf Instrucciones de uso para Ver Garde rc-watch. Garde rc-watch 3 páginas. Rc-watch analog-digital for gents

Imprimir página
Manual transmitter call
•
In order to synchronise your watch manually using the DCF transmitter press and hold corrector T1 for at least 3 seconds. The hands will now move fast forward up to the 12:00
o'clock position. The numbers in the display change to [00] and the radio tower starts to flash. In case the hands should not reach the 12 o'clock position you may also correct this
" Restart after replacing the battery ".
as described in section
For a safe radio reception hold your watch steady and keep it away from sources of interference such as TV sets, computer, telephones and similar devices. After a couple of
minutes the reception is complete and your radio controlled watch shows the current time.
Adjusting the hands
•
In order to correct the position of the hands manually please refer to the instructions in the section
Setting summer / winter time
•
Your watch will be adjusted automatically to summer / winter time in the hour between 2 a.m. and 3 a.m.
Low battery indicator
•
Your watch indicates that the battery must be replaced by a flashing date in the LCD and by stopping the seconds hand on the 12 o'clock position. This informs you that soon you
should have the battery changed by a specialist retailer. During this time, time zone setting and manual transmitter calls are disabled. Please have the battery changed within two
weeks in order to avoid damages to the watch due to battery leakage.
" Restart after replacing the battery "
Please refer to the section
Resetting all settings
•
In the event of faults you may reset all settings made by pressing corrector T1 and T2 simultaneously for >3s. The LCD display and all time information as well as the settings
made are deleted. The LCD shows an " H ", as after changing the battery. For resetting your watch please proceed as described in the section
tery ".
Technical data:
-
3-hand analogue movement with LCD display
-
Reception frequency: 77.5 kHz
-
Synchronisation of time at least 2x at night
-
very precise accuracy outside the range of the DCF transmitter
-
Time zone setting worldwide (full hours only)
-
Option for manual setting
-
Battery
" CR 1620 "
-
Theoretical battery life approx. 2 years
" Restart after replacing the battery ".
to set your watch again.
-
-
2
" Restart after replacing the bat-