Avanti SHP40 Manual de instrucciones - Página 10

Navegue en línea o descargue pdf Manual de instrucciones para Frigorífico Avanti SHP40. Avanti SHP40 16 páginas. Avanti products refrigerator - compact refrigerator user manual

Avanti SHP40 Manual de instrucciones
Long vacations: If the appliance will not be used for several months, remove all food and unplug
the power cord. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave
the door open slightly: blocking it open if necessary.
Moving Your Refrigerator
Remove all the food.
Securely tape down all loose items inside your refrigerator.
Tape the door shut.
Protect the outside of refrigerator with a blanket, or similar item.

Energy Saving Tips

The refrigerator should be located in the coolest area of the room, away from heat producing
appliances, and out of the direct sunlight.
Overloading the refrigerator forces the superconductor cooling system to run longer.
Reduce door openings and extended searches, remove as many item as needed at one time,
and close the door as soon as possible.
One characteristic of superconductor heat-pipe units is the length of time it requires to
recover from having the door opened and shut frequently. It may be necessary to wait longer
for the temperature to return to its former level once the door has been opened for too long.
This is normal for the type of unit.
Superconductor heat-pipe technology costs just pennies to operate. It is environmentally
friendly due to the lack of CFC's.
You can solve many common refrigerator problems easily, saving you the cost of a possible service
call. Try the suggestions below to see if you can solve the problem before calling the servicer.
PROBLEM
Refrigerator does not operate.
Refrigerator is not cold enough.
The light does not work.
Vibrations.
The door will not close properly.
PROBLEMS WITH YOUR REFRIGERATOR?

TROUBLESHOOTING GUIDE

POSSIBLE CAUSE
Not plugged in.
The circuit breaker tripped or a blown fuse.
The appliance temperature control is set at "OFF"
position.
The room temperature is hotter than normal.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
The refrigerator does not have the correct
clearances.
Abnormal voltage.
Not plugged in.
The circuit breaker tripped or a blown fuse.
The LED light has burned out.
Check to assure that the refrigerator is level.
The refrigerator is not level.
The door was reversed and not properly installed.
The gasket is dirty.
The shelves, bins, or baskets are out of position.
10