Avanti EWC18N2PD Manual de instrucciones - Página 10
Navegue en línea o descargue pdf Manual de instrucciones para Enfriador de vino Avanti EWC18N2PD. Avanti EWC18N2PD 20 páginas.
Imprimir páginaIt is recommended you install the Wine Chiller in a place where the ambient temperature is between
23º-26ºC/ 72º-78ºF. If the ambient temperature is above or below recommended temperatures, the
performance of the unit may be affected. For example, placing your unit in extreme cold or hot
conditions may cause interior temperatures to fluctuate. The range of 8º-18ºC/46º-64ºF may not be
reached. The default temperature set at the factory is 12ºC / 54ºF.
CONTROL PANEL
You can select temperature display setting from Fahrenheit to Celsius degree by
pushing this button approximately for 3 seconds. The degrees will appear in blue
color in the temperature display window.
SETTING THE TEMPERATURE CONTROL
Upper zone and bottom zone are each controlled separately
Your Wine Cellar has been equipped with an "automatic" control panel lock, that will activate 12
seconds after the last time a button has been touched.
Push the
and
hear a "BEEP" sound to alert you that the control is now active.
You can set the temperature as you desire by pushing the
each zone. The temperature that you desire to set will increase 1ºF or 1ºC if you push the
button once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the
once.
OPERATING YOUR WINE CHILLER
Recommended Temperatures for Chilling
Red Wines
Dry/White Wines
Rose Wines
Sparkling Wines
Temperature Ranges For Your Wine Chiller
Upper Zone
Lower Zone
button simultaneously for 3 seconds to unlock the control panel. You will
Wine.
14º - 18º C
57– 64º F
9º - 14º C
49 – 58º F
10º - 11º C
51 – 53º F
8º - 9º C
46 – 49º F
8 º - 18º C
46 º – 64º F
12 º - 18º C
54 º – 64º F
button on the control panel for
10
button