Makita DA4030 Manual de instrucciones - Página 7

Navegue en línea o descargue pdf Manual de instrucciones para Herramienta eléctrica Makita DA4030. Makita DA4030 10 páginas. Angle drill
También para Makita DA4030: Manual de instrucciones (17 páginas), Manual de instrucciones (13 páginas), Manual de instrucciones (8 páginas)

Imprimir página

MAINTENANCE

CAUTION:

Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

Replacing carbon brushes (Fig. 12)

Remove and check the carbon brushes regularly.

Replace when they wear down to the limit mark. Keep

the carbon brushes clean and free to slip in the holders.

Both carbon brushes should be replaced at the same

time. Use only identical carbon brushes.

Use a screwdriver to remove the brush holder caps. Take

out the worn carbon brushes, insert the new ones and

secure the brush holder caps. (Fig. 13)

To maintain product safety and reliability, repairs, mainte-

nance or adjustment should be carried out by a Makita

Authorized Service Center.

ACCESSORIES

CAUTION:

• These accessories or attachments are recommended

for use with your Makita tool specified in this manual.

The use of any other accessories or attachments might

present a risk of injury to persons. Only use accessory

or attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita service center.

• Chuck key

• Hex wrench

• Plastic carrying case