HIKVISION DS-9008HUHI-F8/N Manual de inicio rápido - Página 3
Navegue en línea o descargue pdf Manual de inicio rápido para DVR HIKVISION DS-9008HUHI-F8/N. HIKVISION DS-9008HUHI-F8/N 17 páginas.
Imprimir página
R E A R P A N E L
No.
Item
1
Audio In
2
Audio Out
3
Line In
4
HDMI2
5
RS-232 Interface
6
eSATA
7
LAN2
8
RS-485
9
KB
10
Alarm Out
11
Power Switch
12
Power Input
13
Video In
14
USB Interface
15
Video Out
16
HDMI1
17
VGA
18
LAN1
19
Alarm In
20
Ground
1
C O N N E C T D E V I C E S
1.
Connect power supply to the DVR.
2.
Connect DVR to LAN using Cat 5e cable.
3.
Connect video monitor(s) to DVR using HDMI and/or VGA cables, as appropriate.
4.
Connect mouse to USB port (wireless mouse can be used in lieu of included mouse).
5.
Connect to audio I/O using RCA connectors.
2
S T A R T T H E D V R
1.
Plug power supply plug into 110 to 240 VAC outlet (surge suppressor is recommended).
2.
Turn power switch on. Power indicator LED will turn green to indicate unit is starting.
3.
After startup, power indicator LED will remain green.
Description
RCA connectors for audio input
RCA connectors for audio output
Mic input for two-way communication
HDMI video output connector
Connector for RS-232 devices
Connector to external eSATA drive
Connector for LAN (Local Area Network)
Connector for RS-485 devices: T+ and T- pins connect to R+ and R- pins of PTZ
receiver respectively
D+, D- pin connects to Ta, Tb pin of controller (for cascading devices, the first DVR's
D+, D- pin should be connected with the D+, D- pin of the next DVR)
Connector for keyboard
Connector for alarm outputs
Switch for turning device on/off
100 to 240 VAC power
BNC connectors for video input
Connect to USB mouse or USB flash memory devices
BNC connector for video output
HDMI video output connector
DB-15 connector for VGA output to display local video output and menu
Connector for LAN (Local Area Network)
Connectors for alarm inputs
Connect before powering up