Lexmark 09H0052 - T522 25PPM LASERPR Referencia rápida

Navegue en línea o descargue pdf Referencia rápida para Impresora Lexmark 09H0052 - T522 25PPM LASERPR. Lexmark 09H0052 - T522 25PPM LASERPR 2 páginas. Lexmark optra t522: quick reference

Imprimir página
Quick Reference
Lexmark Laser Printer
Operator panel
Ready
1
2
3
4
Menu
Select
Return
5
6
Go
Stop
Press
Menu
to:
• Enter the menus from the ready state
• Scroll through menus or values
• Increase or decrease a numerical value
• Display the Job Menu while the printer is busy
Press
Select
to:
• Select the item on the second line of the display
• Save the selection as a new default setting
Press
Return
to:
• Return to the previous menu level
Press
Go
to:
• Exit printer menus and return to the Ready state
• Clear messages
Press
Stop
to:
• Temporarily stop all print activity without losing
data
Loading a paper tray
Pull here
Length
guide
Length guide
lever
Width
guide
Paper size
indicators
Complete these instructions to load print materials into any of the standard or
optional trays. All paper trays are loaded the same way.
1 Remove the paper tray.
2 Pull the width guide tab and slide the width guide to the far right side of
the tray.
3 Squeeze the length guide lever and slide the length guide to the correct
position for the size paper you are loading.
4 Place the paper into the paper tray with the recommended print side face
down for single-sided printing and face up for double-sided printing. Do
not fill paper above the paper capacity mark (fill line).
Pull the width guide tab and slide the width guide to the left until it lightly rests
against the edge of the paper stack.
Loading the multipurpose feeder
1 Push the lower release latch.
2 Pull the metal bar out far enough to support your paper size.
3 Slide the paper width guide to the far right.
Paper and transparencies
Envelopes
Supported print material sizes and types
Types:
Plain Paper
Labels
Preprinted
Card Stock
Bond
Colored Paper
Transparency
Letterhead
Custom Type <x>
Sizes:
Letter
A4
B4
Folio*
9 Envelope
Legal
A5
JIS-B5
Statement*
DL Envelope
Executive
B5 Envelope
C5 Envelope
7 3/4 Envelope
10 Envelope
Other Envelope
*This size is not available until Size Sensing is turned off. For more information, refer to
the online information.
Loading letterhead
Letterhead must be loaded differently depending on whether you want your print
job to be single-sided or double-sided (duplexed).
In a paper tray
Single-sided printing
Double-sided
(duplex) printing
Envelope
Copyright © 2001 Lexmark International, Inc. All rights reserved.
Printed in USA
This document is printed on recycled paper. 5/01
E.C. 2H0003
In the multipurpose
feeder
P/N 09H0412